Menu
Your Cart

Wood Speaker Stands

Wood speaker stands Harbeth P3 wood SQ402 Speaker stands wooden speaker stands LS35a wood speaker stands Kef LS50 Wood Speaker Stands SQ 402 acoustic steel isolation Constrained layer dampening isolation platform SQ 404 Wood Speaker Stands solid walnut speaker stand supports solid Oak speaker stand supports SQ 402 speaker Stands Kef LS50 Speaker Stands wooden supports Graham Audio LS35a wooden speaker stands Spendor wooden speaker stands SQ 404 Custom Design Speaker Stands.

Mass loading your speaker stand for the optimum performance depends on two particular speaker stand design features. At Custom Design we have found here is a collation between the rigidity and the speaker stands performance. The second feature is Mass loading with Inert Filler and its very dense and very high mass value. When mass loading a speaker stand the important thing to remember is the initial mass of the stand its self. You can't just mass load a 4kg speaker stand with 13kg, the bass frequency timing and precision will be completely lost. Try not to mass load over the original the mass of the stand without Inert Filler applied.

 There can be 3 types of speaker stand design, a lite mass which has laser cut out plates, minimal supports and as rigid as possible. This type of stand requires very little mass loading only to fine tune and control the bass frequency. This is your typical open frame speaker stand design like the HOS 505, QS 104 or the fully welded open frame speaker stands, usually 500g to 800g per support depending upon the height of your speaker stand.

 The second design a Medium Mass speaker combines the rigidity of the open frame principle speaker with the ability to add more Inert Filler, generally around 3.5kg to 7kg per support, depending the height and model. This design speaker stand features acoustic steel isolation top plates either laser cut out or sometimes full acoustic steel top plates depending upon the speaker brand. The base plate can be laser cut out to minimise the initial mass of the speaker stand design, such as the FS 104 signature range and the OM speaker stands, Again, mass loading depends upon the speaker brand as some are mass sensitive and can destroy the original speaker characteristics. The Medium mass loading speaker stands offer a hybrid option, best of both Lite mass and High Mass features.

 The third design is a high mass speaker stand with several supports which can be mass loaded, providing an acoustic sinc for the speaker cabinet. But only a select range can benefit from the high mass principle, those which require help from the speaker stand to produce a better bass frequency. These speaker stands generally have 4mm full acoustic steel top plates, 6mm CR4 steel base plates with large support columns allowing the addition of easily 13kg to 20kg Inert Filler, per speaker stand, for mass loading, designs like the RS 304 XL, ATC SCM100, the Dutch and Dutch SQ 404, FS 106 and the FS 108s. These speaker stand designs in the opinion of Custom Design tent to push the bass frequency more..


Wood Speaker Stands Proac Tablette 10 402 solid hardwood Oak, Walnut, Ash Proac Tablette 402 Wood Speaker Stands Custom Design Solid Walnut Solid Oak Solid Ash Speaker Stand Supports Proac Tablette 10 402 Wood Design Copyright © to Custom Design 2022 The Proac Tablette 10 402 wood Spe..
£0.00
Ex Tax:£0.00
Wood Speaker Stands Proac Tablette 10 Signature 402 solid hardwood Oak, Walnut, Ash Proac Tablette 402 Wood Speaker Stands Custom Design Solid Walnut Solid Oak Solid Ash Speaker Stand Supports Proac Tablette 10 Signature 402 Wood Design Copyright © to Custom Design 2022 The Proac Tabl..
£0.00
Ex Tax:£0.00
SQ 400 Wood Speaker Stands Custom Design Solid Walnut Solid Oak Solid Ash Speaker Stand Supports SQ 400 Wood Design Copyright © to Custom Design (Newcastle) 2008 Acoustic Steel Top Plate Isolation Platform Oiled and Pickled 4mm steel Base Plate Book Shelf Speaker Stands Stand Mount Speaker..
£0.00
Ex Tax:£0.00
Wood Speaker Stands SQ 402 design hardwood Oak, Walnut, Ash SQ 402 Wood Speaker Stands Custom Design Solid Walnut Solid Oak Solid Ash Speaker Stand Supports SQ 402 Wood Design Copyright © to Custom Design (Newcastle) 2008 Acoustic Steel Top Plate Isolation Platform Oiled and Pickled 4mm st..
£0.00
Ex Tax:£0.00
SQ 404 Wood Speaker Stands Custom Design Solid Walnut Solid Oak Solid Ash Speaker Stand Supports SQ 404 Wood Design Copyright © to Custom Design (Newcastle) 2008 Acoustic Steel Top Plate Isolation Platform Acoustic Steel Base Plate Book Shelf Speaker Stands Stand Mount Speaker Stands SQ 40..
£0.00
Ex Tax:£0.00
SQ 404 XL Wood Speaker Stands SQ 404 XL Wood Speaker Stand Supports Full 4mm Acoustic Steel isolation Platform Speaker Stands SQ 404 Custom Built Speaker Stands Custom height speaker stand supports SQ 404 XL Custom Made Speaker Stands All Copyright Design @ Custom Design 2022Speaker cabinets require..
£0.00
Ex Tax:£0.00
Studio Monitor Speaker stands Custom Built SQ 404 wood Speaker Stands Studio Monitor wood Speaker Stand Supports SQ 404 wood supports Speaker Stands Studio Monitor Solid Oak Supports Solid Walnut supports 4mm Acoustic Steel isolation Platform Wood Speaker Stands SQ 404 Custom Built Speaker Stands Du..
£0.00
Ex Tax:£0.00
Showing 25 to 31 of 31 (3 Pages)