Stand mount speakers and book shelf speakers require a speaker stand support to position the listening experience to the perfect height of our customers specific requirement. Speaker stands also need to provide a complete rigid, isolating support platform for the speaker to operate at the maximum performance possible. This can be achieved through the integrity of the speaker stand, the number of supporting columns, the engineering incorporated in to the design, the type and number of fixings, the built in specialist isolation acoustic steel, 4mm acoustic steel for resonance energy absorption and conversion or the quality and thickness of materials involved, oiled and pickled steel for a quality and superior surface finish.
The speaker stands designed and manufactured by Custom Design provide the perfect isolating solution for speaker cabinets. Speaker cabinets resonate, therefore the best possible isolation point would be the corners which resonate the least. That is why Custom Design provide an optional standard range of top plate dimensions and provide a custom made service for our customers to achieve the best possible listening experience and sound performance from their HiFi system.
The CD 606 Support Speaker Stand Furniture Range have been introduced by Custom Design as a direct result of our customers requests from the Munich Show 2019. Customers perceptions of Hi-Fi furniture have changed, design is very important, more contemporary or classic aesthetics than practical accessory, but performance is also very important for the sound quality. That is why the CD 606 Speaker Stand Support Range have been designed as a piece of furniture, then with the 35 years of experience and knowledge details added to enhance the CD 606 range acoustically to the highest standards without compromise to the design or performance
The CD 606 Speaker Stand Support Range are supplied as standard with the Custom Design world renown Acoustic Steel top and base plates . The constrained layer dampening system includes a polymer which converts resonance vibration noise into negligible heat which is dissipated by the polymers unique formula. The penta design also includes the Custom Design copyright base plate cable tidy facility, discretely hiding the cables behind the centre column support.
The CD 606 Speaker Stand satellite and centre column supports, in steel, are manufactured from ERW BS EN 10305-3 steel and the centre support column can be mass loaded with our specialist Inert Filler which is only recommended to use with the whole Custom Design range of speaker stands. The unique square, penta design includes a 4mm Acoustic steel top plate and 6mm Acoustic Steel base plate which have been precision laser cut then hand polished, hand linished and hand finished before electro static powder coated. When combine they provide a hybrid, isolated and rigid speaker stand support frame with the ability to control and fine tune the bass frequency, if required, by mass loading the centre column with only recommended Custom Design Inert Filler. Supplied as standard with M8 Nickle plated spike covers and base isolation spikes with allen key adjustable facility is an important attention to detail which we believe enhances our customers experience and satisfaction. The CD 606 Speaker Stand hexa design provides a rigid and solid foundation for the for the small book shelf speakers which require a more dynamic performance from their support.
All of the Custom Design solid hardwood Support Furniture Range are manufactured from either solid Walnut, solid Oak or solid Ash all supplied from professionally managed, sustainable forests where more trees were planted than harvested in the last 40 years. Please visit our Colour swatch page for more information on the finishes available.
Custom Design sources all cardboard packaging from only PEFC or FSC certified companies. 76% of the cardboard packaging has been manufactured from recycled material, which can be 100% recycled.
Rigidity is proven integral design feature which improves sound performance. The Custom Design philosophy of multi column supports provides superior sound quality and performance over traditional single column support design speaker stands.
Custom Design do not use Aluminium in the construction of any speaker stand designs. The natural properties of aluminium prevent speaker stands from performing to the best of their ability as mechanical feedback can be prevented, just like over mass loading. Which will result in reducing the dynamic range and the depth of bass frequency.
Standard Height: 610mm (635mm including base isolation spike)
Top Plate Dimension: 180 x 240 x 4mm Acoustic Steel supplied as standard
Base Plate Dimension 230 x 300 x 6mm Acoustic Steel supplied as standard
Standard Finish: Black or White in the steel option or solid Walnut, Solid Oak or Solid Ash hardwood centre column supports
Solid Oak and Solid Walnut supports are finished with 3 layers of water based clear Lacquer
Black Zinc Plated M8 Allen Key adjustable Base Isolation Spikes supplied as standard
Black Zinc Plated complimenting spike covers supplied as standard
Suggested Inert Filler quantity of 1 bag per steel centre column, if the Bass frequency requires more control then add Inert Filler at 200g increments per column until your CD 606 speaker stands are tuned to perfectly compliment your speaker.
Unique Cable Tidy facility
60kg Maximum weight
Image: CD 606 Speaker Stand Support in Black with Solid Hardwood centre supports in Oak
