Custom Built Open Frame Speaker Stands Harbeth Speakers, Open Frame Speaker Stands Spendor Speakers Open Frame Speaker Stands Graham Audio Speakers Fully Welded Open Frame Speaker Stands Custom Built Custom height Custom Made Speaker Stand Supports
Custom Built Open Frame Speaker Stand Supports are hand made by the craftsmen at Custom Design and each pair takes approximately 5 hours to manufacture. Hand made, hand finished and hand polished with the attention to detail our customers expect and demand.
Custom Design have a skilled workforce with over 35 years of experience in design and the manufacture of high quality, high performance, specialist custom built Speaker Stand Supports, Hi-Fi Support Tables and Audio Visual furniture.
We design and manufacture in Newcastle upon Tyne, England and if you have a design or specific requirement which cannot be fulfilled by our extensive range of speaker support stands or Hi-Fi equipment supports, then we can manufacture it for you.
We were asked by Hi-Fi Worlds Editor David Price to manufacture a pair of speaker stands to his requirements, please read his thoughts below.
Custom design extra special - One of the most common questions that users of classic loudspeakers ask us is, where can I get some decent speaker stands? The trouble is, virtually all pre-eighties boxes were expected to sit either on the floor behind the settee or - if they were lucky - on a pair of appalling castor-based contraptions which were primarily designed to make the speakers easy to wheel behind the settee...These days, it s easier, as manufactures now recognise the stand as part of the equation, but there will still be times when a high quality, made-to-measure stand is required - enter Custom Design. Although the company makes a range of excellent off-the-shelf products, it can also fabricate bespoke stands to customers specifications. In the case of the stands shown, they were made for Yamaha NS 1000Ms, to take them 20cm off the floor and give a rock-solid support. The result was superb, these Custom Design frame stands getting a brilliantly firm bass from the Yamaha's, letting their mid range drivers breathe.
Their tubular design is quite reminiscent of the classic Linn Isobarik stands, being extremely rigid. Acoustic Steel sandwiching a polymer layer was used in parts, making the stands far quieter than they otherwise would have been. They can also be shot-filled too, and Custom Design can supply this at extra cost. Overall, the company displayed a superb level of craftsmanship - clean welds, excellent paint finish and perfect spike implementation made for a superb finished product.
If you've a special project in mind, or a bog-standard speaker you want a stand for, this is an excellent company to consider. Price varies according to the work commissioned of course, but they re extremely reasonable.
Hi-Fi World - June 2006 Reviewed by David Price
Custom Built Harbeth Compact 7 Speaker Stands
Please visit our Acoustic Steel page to learn about our exclusive resonance vibration noise absorbing acoustic steel and aluminium platforms and supports. Learn which frequencies can be absorbed by combining our Acoustic Steel Top plate with Acoustic Steel Base plate and Inert Filler tested with a pair of the multi award winning RS 300 speaker stands.
5 hours to custom build and manufactured from 25mm x 25mm ERW BS EN 10305-3 steel tube with M8 zinc plated base isolation spikes supplied as standard. Mass loading points are available on request and designed to dampen the vertical supports and top section if required. The steel frame is fully welded together for total rigidity. The hand made, hand finished and hand polished approach to quality makes the Fully Welded Open Speaker Stands one of the labour intensive designs available and standard finishes of black or white fine texture powered coating. Please contact us for more details if required.
Custom Design do not use Aluminium in the construction of any speaker stand designs. The natural properties of aluminium prevent speaker stands from performing to the best of their ability as mechanical feedback can be prevented, just like over mass loading. Which will result in reducing the dynamic range and the depth of bass frequency.
Image: Custom Built open frame speaker stand design in black - Built to your specification by hand.
Image: Custom Built Harbeth M40.1 speaker stand supports at the Brussels High End Show in the room
of Pinx Noise, one of 2 dealers who are stockists of Custom Design in Brussels. The other is Noir et Blanc
Image: Custom Built open frame speaker stand support in black image 3 - Douglas Gun April 2016
Image: Custom Built open Frame speaker stand support in black image 2 - Douglas Gun April 2016
Image: Custom Built open Frame speaker stand support in Black - Carl Beck Worth 20th December 2017
Image: Custom Built Harbeth SHL5 speaker stand supports - Paul West - see more @consideredthings on Instagram
Image: Custom Built Harbeth M40.1 speaker stand supports with Amp shelf built in - Guildford Audio
Image: Custom Built Harbeth P3 speaker stand support - Al in the USA - supplied by kemela Distributor for the USA
Image: Custom Built Spendor Speaker Stand Supports - Audiorene - supplied by Marja Distributor for Netherlands
Image: Custom Built Graham Audio LS5/9 Speaker Stand Supports - Andre - Portugal
Image: Custom Built Harbeth M30.2 speaker stand support - Oscar - Spain
Image: Custom Built Studio Monitor Speaker Stands - Marc
Image: Custom Built Harbeth M30.2 speaker stand support - Peter Williams
Image: Custom Built Rega Speaker Stands - Malin - London
Image: Custom Built Open Frame speaker stands Spendor Classic 2/3 - Image supplied by Kemela Audio
Image: Custom Built Harbeth P3 Fully Welded Open Frame 190 x 184 x 610mm high
Image: Custom Built Harbeth Speaker Stands Fully Welded Open Frame Mass Loading Point.
Image: Custom Built Harbeth Fully Welded Open Frame Speaker Stands Black Zinc Isolation Spike and Solid Aluminium Floor Protector.
Image; Custom Built Fully Welded open Frame Speaker Stand Top Plinth and Isolation Pads
Image: Harbeth C7 Custom made fully welded open frame speaker stand hand finished top plinth with isolation pads supplied as standard.
Image: Harbeth Compact 7 Custom Made Fully welded open frame speaker stand in black
Image: Inert Filler Custom Design Specialist Mass Loading Speaker Stand Material - 13.5kg per box 8 bags per box
Image: Set of 8 - Solid Aluminium Floor protectors in Black
- Model: 1201