Menu
Your Cart

Spendor Classic 2/3 Custom Built QS 104 Speaker Stand Support

Spendor Classic 2/3 Custom Built QS 104 Speaker Stand Support
Spendor Classic 2/3 Custom Built QS 104 Speaker Stand Support

Speaker Stands Spendor Classic 2/3 QS 104 speaker stands Open Frame Custom Built QS 104 Speaker Stands 4mm Acoustic Steel Top Plinth Isolation 4mm CR4 Steel Isolation Base Plate Speaker Stand Support Spendor Classic 2/3 Custom Built QS 104 Speaker Stands Mass Loading Speaker Stands Book Shelf Speaker Stands Stand Mount Spendor Speaker Stands QS 104 Speaker Stands custom built All Design Copyright © to Custom Design (Newcastle) 2021
 

The Spendor Classic 2/3 Custom Built QS 104 Speaker Stands are a quadrifid design available as standard 425mm high including base isolation spikes and manufactured with ERW mild steel support columns.
The Spendor Classic 2/3 QS 104 speaker stand design includes 4mm Inert Acoustic steel top plate and a 4mm CR4 steel base plate, when combined with zinc plated, allen key adjustable M8 base isolation spikes and M8 fixing bolts provide  total joint rigidity. The hand finished, polished acoustic steel isolation plinths connect to ERW BS EN 10305-3 steel 25.4 x 25.4mm tubes, as standard for sound quality and as part of the Custom Design attention to detail philosophy.

Custom Design  manufacture the exclusive, world renowned, Inert, Acoustic Steel and Acoustic Aluminium products for total hifi isolation stands. Custom Design are proud to present the open frame QS 104 speaker stands. The QS 104 Speaker Support Stand Range are manufacture by the craftsman at Custom Design, creating a light weight, totally isolated, rigid speaker stand support with a light weight initial Mass, this has been reduced by laser cutting the centre section of the CR4 4mm base plate and mass loading points included.

Please remember before Mass loading the speaker stand steel support columns with Inert Filler, we suggested you listen to your music and system first and if the bass frequency requires a little more control then add Inert Filler, which greatly increases the final mass of the speaker stand, which in turn could effect the bass frequency more depending upon the speakers design and manufacturer. Inert Filler 1.7kg per bag and 13.5kg per box.

The modern, contemporary open frame design QS 104 speaker stands have true minimal aesthetics, especially with the Spendor speaker design. When combined with Inert Acoustic steel Top plinths and the CR4 Steel Base plates, the reduction in resonance noise vibration is significant, resulting in a more dynamic, improved performance and sound quality. Please visit our Acoustic Steel page to view the graph demonstrating which frequencies of resonance vibration noise are absorbed by each process and the combination of Acoustic Steel top and base plates with our specially selected Inert Filler material.


Spendor Classic 2/3 Custom Built QS 104 Speaker Stand Support are supplied as standard with an Inert Acoustic Steel Top Plinth and 4mm CR4 Base plates.
Top Support 260mm wide x 300mm depth  x 4mm Acoustic Steel

Zinc plated, Allen key Adjustable M8 base isolation spikes supplied as standard.
Standard height available 400mm  Custom Heights available on request.
Standard finishes: White or Black 

Initial Mass Spendor Classic 2/3 - 12kg per pair

Image: Supplied by Kemela Audio - Spendor Classic 2/3 Custom Built SQ 404 Steel Speaker Stands 260mm x 300mm x 425mm high including base isolation spike.


Write a review

Note: HTML is not translated!
Bad Good
  • Model: Sp231
£0.00
Ex Tax: £0.00